Parts

The Jotto Desk 425-5202 Side Table is 7" x 10" with Short Clip and is typically used as a secondary desktop on any Jotto Desk laptop mount. This Side Table can be mounted on the main articulating arms if the user wishes but is more beneficial as a secondary desktop work area. Required for Secondary Desktop Option: (Select One from Below if Required)6.75" Straight Arm 425-30628.75" Straight Arm 425-30719" Straight Arm 425-120110.75" Straight Arm 425-3045 ...

The Side Hinged Armrest is specifically designed for use in a 2015+ Chevy Tahoe Integrated Pentax/Brother Contour Console (IPBCC). It provides cushioned arm support for both driver and passenger along with quick and easy access to the printer when needed.For Use With:2015+ Chevy Tahoe IPBCC 425-6621

If you travel with your laptop mounted, stability is important. The Single Brace Leg Kit from Jotto Desk will provide additional support for your Mount. This is a recommended accessory for use on rough roads and off-road. Additionally, the Brace Leg Kit is a vital component to anyone installing a Universal Jotto Desk that intends to leave the laptop mounted as the vehicle is travelling. For the ultimate in support and stability, see the Dual Brace Leg Kit 425-5272 Click Here. ...

The Kensington Master Lock® Computer Securing System, deters the theft of your electronic devices.  The lock system is easy to use and when you secure your computer using the Kensington locking system it is the first line of defense against theft. Fasten the security cable to permanent structure in the vehicle or any location when required to keep your laptop and data safe!

THE USB/12V 5 LED Flexlight is a great addition to a Jotto Desk.  The flexible light allows you to position it as you require and the Blue Lens filter assists with nighttime safety in the vehicle.The flexlight comes with a USB connector and a 12V adapter to USB.  So if you choose to run it off your vehicle power and not your laptop the choice is yours.

The Jotto Desk Swing Arm Extension provides additional reach for the Jotto Desk Desktop. Extra wide-body vehicles may need additional extension than what a standard 2-Piece Swing Arm provides. Using this Extension, the total maximum extendable distance is 20.5". Also very useful if you regularly use your Jotto Desk laptop mount while standing outside of the vehicle.

Small Cell Phone Holder requires a Pivoting or Stationary Side Saddle and attaches to the 10" x 12" Desktop.  Up to 3 Phone Holders can be mounted to the side of a single desktop. Small Cellphone Holder is NOT recommended for smartphones.   See 425-1308 for Smartphone Holder Requires 1 of the following to Mount: Pivoting Side Saddle 425-5225Stationary Side Saddle 425-5224 ...

The Jotto Desk 425-5201 Side Table is 7" x 10" with Long Clip and is typically used as a secondary desktop on any Jotto Desk laptop mount.  This Side Table can be mounted on the main articulating arms if the user wishes but is more beneficial as a secondary desktop work area.Required for Secondary Desktop Option: (Select One from Below if Required)6.75" Straight Arm 425-30628.75" Straight Arm 425-30719" Straight Arm 425-120110.75" Straight Arm 425-3045 ...

If you travel with your laptop mounted, stability is important. The Dual Brace Legs Kit from Jotto Desk will provide the ultimate in support for your mount. This is a recommended accessory for use on rough roads and off-road conditions.  Additionally, the Dual Brace Legs Kit is a vital component to anyone installing a Universal Jotto Desk that intends to leave the laptop mounted as the vehicle is in motion. For the Single Brace Leg Kit 425-5238 Click Here ...

The Jotto Desk 425-5549 Side Table is 7" x 10" with no Clip and attaches to the 425-1201 Straight Arm to create additional work space, or is used for a portable printer.  Side Table comes with Nylon Straps and Velcro to secure your printer. Use the 9" Straight Arm 425-1201 to mount the Side Table as a secondary work space or Printer Mount on your Jotto Desk below the Desktop.

Computers and printers go hand in hand. This fact doesn't change when you're on the road. To get the most out of your mobile office, use the Printer Side Table accessory with your Jotto Desk. The Printer Side Table attaches to a Jotto Desk Vertical Assembly, below the main Swing Arm. The Side Table can also be used as a surface for your external mouse to be used on, or you may also use the table as a writing surface. This multi-use accessory is easily removed from the Jotto Desk when not in...

Your computer and phone belong together. The Smartphone Holder with Pivoting Side Saddle Accessory from Jotto Desk is designed to mount your smartphone to the side of the standard Jotto Desk ACD desktop. Adjusts to work with all smartphones. Will keep your phone and laptop computer together side-by-side. Give yourself the benefit of knowing exactly where your smartphone device is at all times. Use the Jotto Desk 425-5619 to get the most efficient work space for your mobile office.Note: &nb...

Designed to keep your screen in place while you use your computer and to minimize vibration while driving. Adjustable height fits all computer screen sizes. Mounts to back side of 10" x 12" Desktop. Comes complete with screws for installation.For the A-Mod Lockable Desktop Screen Holder 450-0449 Click Here

The 4" Utility Box Faceplate Mount provides 4" of internal storage space inside a flat or horizontal section of a Jotto Console. Mounts to the faceplates rails.

The 4" Utility Box-Faceplate Mount provides 4" of internal storage space inside a Standard Console. Mounts to the faceplates rails. It is Not Included with the Jotto Desk Console Faceplates and must be purchased separately.

The Hanging File Box includes an armrest and lid with lock. Holds 8.5" x 11" file folders. Mounts to Jotto Desk Console floor plate. A great way to secure that must have paperwork in your vehicle and keep it safe from theft.  

The Side Mount Bracket for Keyboards attaches to the side of a Jotto Console. It is mounted to the faceplate rails. It secures the keyboard while providing ergonomic use for the user.

This functional arm rest for the Jotto Desk Console is a great way to add to the comfort of officers in their work environments.  The Rear Hinged Armrest provides arm cushioned support for both driver and passenger in the Ford PI Utility with the Max Depth Jotto Desk Console 425-6479.

The Side Mount Arm Rest provides cushioned arm support for officer comfort and still allows for quick, easy access to vertically mounted weapons for maximum officer safety. Works with the Following Only:Wide Body AR/ZRT Jotto Console 425-6491Ford F-150 SSV/PR, F250-550 (2018+) Contour Console with Locking Lid Storage 425-6500 ...

The 6" EMS Faceplate Rail (Pair) attaches to the 6" EMS Utility Box to create additional equipment mounting space for use with a Jotto Console. Click Here for the Required 6" EMS Utility Box 425-2694 

The Single Cup Holder attaches to a Jotto Desk Console Floor Plate or to the front of a Standard Console.  Will hold one mug, can or biggie size drink. If you require a Dual Cup Holder 425-6205 click here

The Dual Mic Clip is specifically designed to mount to the radio housing of a 1997 - 2012 Ford Crown Victoria. Universal Mic Clip Options: (Click on links below) Single Mic Clip 425-6035 Faceplate Mounted to a Jotto Console  Universal Magnetic Clip 425-3816 attaches to any location on a Jotto Desk Console ...

The Hinged Armrest mounts to a Jotto Console Floor Plate and provides cushioned arm support with hinge for easy access to surroundings.Easy install with the Jotto Console Floor plate top down installation. 

Microphone Bracket attaches to a Jotto Desk Console in desired location using small self tapping screws and can be used with a Motorola Radio Mic Clip. Jotto Desk Console Universal Mic Clip Options: (Click on links below) Universal Magnetic Clip 425-1912 attaches to any location on a Jotto Desk ConsoleMagnetic Mic Kit - Single Pack 425-3816Magnetic Mic Kit - Five Pack 425-3817Magnetic Mic Kit - 25 Pack 425-3818 ...

The ABS Dual Cup Holder mounts to the faceplate rails of a Jotto Desk Console and holds up to 2 drinks. Cup holders are angled the same as the Jotto Desk Standard Consoles.  If required in a flat or level console use the 425-6038 Dual Cup Holder.

The Magnetic Mic Clip Kit is a universal system for Microphones in the market today.  The Heavy Duty magnetic receiver attaches to the Jotto Desk Console in any location or can be attached to the optional Magnetic Microphone Bracket 425-3842. Magnet Mic Clip Pack Options: Magnetic Mic Kit - 5 Pack 425-3817Magnetic Mic Kit - 25 Pack 425-3818 ...

The Magnetic Mic Clip Kit is a universal system for Microphones in the market today. The Heavy Duty magnetic receiver attaches to the Jotto Desk Console in any location or can be attached to the optional Magnetic Microphone Bracket 425-3842. Magnet Mic Clip Pack Options: Magnetic Mic Kit - Single Pack 425-3816Magnetic Mic Kit - Five Pack 425-3817 ...

The Side Hinged Armrest is specifically designed for use in the Integrated Pentax/Brother Contour Console (IPBCC) Jotto Desk Console allowing officers comfort and proper access to the printer to easily use the device when needed.  Simple top down installation makes this a great accessory addition to the Integrated Pentax/Brother Contour Console (IPBCC). For Use With: 2013+ Dodge Charger IPBCC 425-6485 ...

The Mounting Bracket is used for the Magnetic Mic Kit and allows you to position your mic anywhere on the installed Jotto Console to maximize comfort and safety. Magnetic Mic Kits are sold separately. Magnetic Mic Kit Options:  (Select from the links below) Magnetic Mic Kit - Single Pack 425-3816Magnetic Mic Kit - Five Pack 425-3817Magnetic Mic Kit - 25 Pack 425-3818 ...

The 4" Faceplate Lock Box provides 4" of internal storage space inside a Jotto Console. Mounts to the faceplate rails and is lockable.  This acts as a first line of defense from theft in your Jotto Desk Console equipped vehicle.  You can keep vehicle documents, keys or even garage door openers safe while the vehicle is unattended. This is a Jotto Desk Console Accessory and as such is not included with the purchase of a Jotto Desk Console.  

The Smooth Glide Mic Clip is custom designed for the Jotto Desk AK-12 Console 425-6159 or the AK-12 Jotto Console 425-6451/4138 with A-Mod Desktop.  The mic clip attaches to the front of the AK-12 Desktop on AK-12 Jotto Desk Console for easy access to mics. Universal Mic Clip Options: (Click on links below) Single Mic Clip 425-6035 Faceplate Mounted to a Jotto Console Universal Magnetic Clip 425-1912 attaches to any location on a Jotto Desk ConsoleMagnetic Mic Kit - Single...

The Jotto Desk 425-5182 Mounting Plate is used as an adapter plate for Kodiak, Gamber Johnson, Ledco/Havis, L&E, Itronics and First Mobile desktops so they can attach to the Jotto Desk articulating arm assembly or the Jotto Straight Arm depending on the selection made at time of purchase of your Jotto Desk.

The Jotto Desk 425-5186 Writing Top is 12" x 13" and attaches to the Articulating Swing Arm or Straight Arm assembly depending on your Jotto Desk set up.  The writing top gives you a smooth surface to write on with the same reach and functionality of your standard Jotto Desk Desktops.  Some customers choose to add this option to their Laptop or Tablet Mount in order to have a versatile work environment in the vehicle.

The Jotto Desk 425-5215 10" x 12" Cable-Dock Desktop secures a laptop to the desktop and comes standard with 22" Cables that fits laptops that are 12" - 15" wide.  This is the original Jotto Desk Laptop Desktop. For ACD Cable-Dock Replacement Part Kit 425-5237 Click HereOther Cable-Dock Desktop Options:ACD Desktop 425-5634 comes with 18" CablesACD Desktop 425-5635 comes with 20" CablesACD Desktop 425-5636 comes with 26.75" Cables Lockable Desktop Options:  (Select from Links Below)...

The Jotto Desk 425-5330 P2 Mounting Plate is used as an adapter plate for Panasonic WEB Dock so they can attach to the Jotto Desk Straight Arm or Articulating Arm.

The Jotto Desk 425-5569 Mounting Plate is designed specifically for the Panasonic CF18 and CF19 so they can attach to the Jotto Desk straight arm or articulating arm.

The Jotto Desk 425-5615 Netbook Desktop secures a netbook to the desktop and can be quickly and easily removed.  Maximum width for the Netbook Desktop is 10.25" wide.  If your device is wider than 10.25" please use the Standard Desktop 425-5215.

The Jotto Desk 425-5634 is a 10" x 12" Cable-Dock Desktop with 18" cables that secures a laptop that is between 10.75" - 11.5" in width.  If you are repairing or fixing up a current Jotto Desk Desktop there is a Cable-Dock Upgrade Kit Available 425-5237. Other Cable-Dock Desktop Options: ACD Desktop 425-5635 comes with 20" CablesACD Desktop 425-5215 comes with 22" CablesACD Desktop 425-5636 comes with 26.75" Cables Lockable Desktop Options: A-Mod Desktop 450-4143 (Fits -...

The Jotto Desk 425-5636 is a 10" x 12" Cable-Dock Desktop with 26.75" cables that secures a laptop that is 15" or wider in width.  If you are repairing or fixing up a current Jotto Desk Desktop there is a Cable-Dock Upgrade Kit Available 425-5237. Other Cable-Dock Desktop Options: ACD Desktop 425-5634 comes with 18" CablesACD Desktop 425-5635 comes with 20" CablesACD Desktop 425-5215 comes with 22" Cables Lockable Desktop Options: A-Mod Desktop 450-4143 (Fits - 11.25" - 13.625" Laptop...

Jotto Desk Faceplate 425-1719 Using this lift bracket will provide additional height elevation and tilt angle to the radio or device being installed. This allows for additional depth for longer radio bodies, as well as provides easier view and access to front-facing controls. The faceplate for the device then attaches to the lift bracket.  An appropriate faceplate for the radio or device is still required.This bracket attaches to any Jotto Desk Console 3" opening. This...

Jotto Desk Faceplate 425-1756 Using this lift bracket will provide additional height elevation and tilt angle to the radio or device being installed. This allows for additional depth for longer radio bodies, as well as provides easier vision and access to front-facing controls. An appropriate faceplate for the radio or device is still required. The faceplate for the device then attaches to the lift bracket. This bracket attaches to any Jotto Desk Console 2" opening. This...

The Jotto Desk Part 425-1154 3-point Knob with Spring is only required for the original style rods and tubes where there is a groove and notches in the length of the rod, which are used to adjust the height. The 3-point Knob with Spring tightens and secures the rod to the tube after optimum height is determined.

The Jotto Desk Part 425-1188 is a 2-Piece Articulating Swing Arm that provides the critical link between the vertical tube & rod and the desktop.  The swing arm motion allows the desktop to be positioned on the driver's or passenger's side, or centered in front of the dash. The ratchet handles provide a quick, tool-less way to tighten the swing arm's position and will keep your electronic device from moving while the vehicle is in motion.For the 3-Piece Articulating Arm Assembly...

The Jotto Desk Accessory 425-1201 is a 9" Straight Arm attaches to the large 1¼" diameter of the Vertical Rod below the standard Swing Arm.  It is typically used to attach the Jotto Desk Accessory Tabletops, such as the Printer Side Table, or Writing Table. It is also often used to mount and additional tech device such as a Tablet Mount, iPad Mount or a Surface Pro Mount.

The Jotto Desk Large Ratchet Handle is used to quickly and easily secure the desktop to a Jotto Desk articulating arm or straight arm in a desired position. This specific ratchet handle provides a quick, tool-less way to tighten the desktop's position and will keep your electronic device from moving while the vehicle is in motion.

The Jotto Desk Medium Ratchet Handle is used to quickly and easily secure the articulated arm or straight arm to a Jotto Desk in a desired position. This specific ratchet handle provides a quick, tool-less way to tighten the arm's position and will keep your electronic device from moving while the vehicle is in motion.

The Jotto Desk Smart Phone Holder 425-1308 is a universal holder accommodating today's smart phones such as the iPhone and Android phones. Up to 3 Smart Phone Holders can be mounted to the side of the desktop. Requires 1 of the Following to Attach to the Desktop: Pivoting Side Saddle 425-5225Stationary Side Saddle 425-5224 For the Small Cell Phone Holder 425-5159 click here. ...

The Jotto Desk Part 425-1416 Foot Mount is a small triangular base that connects a Jotto brace leg to the floor and uses self-tapping screws to secure and strengthen the laptop mount.